Question: What Order Do I Add Chemicals To My Pool?

What chemicals do I add first to my pool?

Pool Startup Chemicals GuideOptional Anti-scaling Product.

If you’re filling your pool with fresh water, this is a good time to add an anti-stain or anti-scaling product.

Adjust the pH.

The first step when treating your pool’s water is to adjust the pH.

Adjust Total Alkalinity.

Sanitize the Water.

Adjust Hardness.

Add Algaecide..

What chemicals do I need to add to a freshly filled pool?

The Perfect Chemical Balance for a Pool Start UppH – 7.2-7.6.Alkalinity – 80-120 ppm.Calcium Hardness – 180-220 ppm.Cyanuric Acid – 30-50 ppm.Chlorine – 1-3 ppm.

Can I add shock and chlorine at the same time?

Yes, you can add both shock and chlorine to a pool. However, you should not add them at the same time. The best thing to do is to shock your pool first. Then, once the chlorine levels go down to a certain threshold, you can add more chlorine.

What should be adjusted first alkalinity or pH?

Check Total Alkalinity (TA) first, then adjust for proper pH range. Proper TA will buffer pH, that is, it will help to prevent pH fluctuations. Use fresh, high quality test strips. Excessively high bromine or chlorine levels can result in false pH and TA readings.

How often should pool be shocked?

It’s often recommended to shock your pool once a week. If you don’t do it every week, you should at least do it every other week. This is necessary to maintain your pool’s water chemistry. If you have a lot of people over in your pool or have a party, you may want to shock your pool more frequently.

Can you add acid and chlorine to your pool at the same time?

Acids and Chlorine/Bromine Don’t add an acid and chlorine or bromine together! Muriatic acid and sulfuric acid (liquid acid), and chlorine together make a poison similar to “mustard gas”.

Should I add acid or chlorine first?

The addition of the chlorine or salt will give you the pH increase. It’s not worth it to add an alkali one day, to raise the alkalinity or the pH, then an acid the next when neither was necessary!

How long do I wait between adding pool chemicals?

roughly 10 minutesThe wait times between adding pool chemicals is usually around 10 minutes each, as that is also sufficient time for the chemicals to mix in the water. Users also under normal conditions can swim roughly 10 minutes after adding chemicals.

Can you add pool chemicals at the same time?

Chlorine shock + Sequester Agent: Chlorine shock will also disrupt stain & scale chemicals, aka chelators or sequestering agents, if added at the same time. Add Stain & Scale chemicals a day before or several days after, shocking a pool.

Can I add shock and algaecide at the same time?

While shocking and adding algaecide is effective in getting rid of algae, it should not be done together. This is because when you mix chlorine and algaecide together, it renders both of them useless. Hence, you should first shock the pool and wait for the chlorine levels to fall below 5 PPM.

How much baking soda do I add to my pool?

A rule of thumb is 1.5 lbs. of baking soda per 10,000 gallons of water will raise alkalinity by about 10 ppm. If your pool’s pH tested below 7.2, add 3-4 pounds of baking soda. If you’re new to adding pool chemicals, start by adding only one-half or three-fourths of the recommended amount.

How long after putting acid in Pool Can I add chlorine?

Question: To adjust my pool Ph, how long after adding muriatic acid should I wait to add chlorine? Answer: After lowering the pH, allow the water to circulate for 30 minutes. Then the chlorine can be added.

How long after putting bleach in Pool Can you swim?

4 hoursAnswer: Generally you will want to wait at least 4 hours, but ideal is waiting for one complete turnover of the water (the time it takes all the water to go through the filter).

What happens if you go in a pool that was just shocked?

Common dangers presented in chemical shock treatments: Treatment is highly corrosive. Will cause skin and eye damage. May be fatal if swallowed. If this treatment gets in your eyes: Hold eye open and rinse slowly and gently with water for 15-20 minutes.

How do I know what chemicals to add to my pool?

To maintain a safe and healthy swimming pool, you need to keep your pool chemicals at the following levels:pH: 7.4 to 7.6.Alkalinity: 100 to 150 ppm.Calcium Hardness: 175 to 225 ppm and 225 to 275 ppm for plaster pools.For Chlorine or Salt Water Pools: 1 to 3 ppm (I recommend you keep it at 3 ppm)More items…

Can you add chlorine and pH down at same time?

If both the pH and total alkalinity levels are too high, you’ll need to add pH reducer. Once you get your pH levels between 7.2 and 7.5 and your total alkalinity between 60 and 120 ppm you can move on to working on the calcium hardness and chlorine levels.

How long after adding algaecide can you shock?

Keep your pump and filter running. Give the shock a good 12 to 24 hours to work it’s magic. If the algae hasn’t cleared up after 24-48 hours, clean and brush the pool and add another shock treatment.